Vanguard Industrial Protection shieldSpeed Bumps For Sale
Get a quote

speed bumps for sale, speed bumps, rubber speed bumps, buy speed bumps, purchase speed bumps, speed humps for sale, rubber speed humps, portable speed bumps, temporary speed bumps, removable speed bumps, plastic speed bumps, heavy duty speed bumps, parking lot speed bumps, commercial speed bumps, speed bumps and speed humps

In stock in the USA · Ships nationwide

Speed bumps
built for heavy traffic

Commercial rubber speed bumps in two profiles: 2.4 in steel-plate reinforced for truck and forklift traffic, 3 in modular for parking lots and campuses. Bolt-down, reflective, backed by a 5-year warranty.

Get a quote in 24hChat on WhatsApp
In stock in the USA
Ships to all 48 contiguous states
Quote in 24 hours
Real pricing, freight included
5-year warranty
Commercial-grade recycled rubber
Volume pricing
Pallet and container pricing available
Yellow and black rubber speed bump bolted across a luxury residential driveway with a BMW X6 crossing it
Installed lane · reflective chevrons · bolt-down
176,000 lb
Axle load rating
≤ 6 mph
Target speed, HD profile
48 states
LTL freight coverage
24 hours
Quote turnaround

The catalog

Two profiles. Both in stock.

Pick by target speed and vehicle weight. Every kit ships with anchors, end caps and an install sheet.

3-inch modular rubber speed bump with yellow and black interlocking sections and rounded end caps

Target speed ≤ 6 mph

176,000 lb (88 US tons)

2.4-Inch Heavy-Duty Speed Bump — Steel-Plate Reinforced

Steel-plate reinforced rubber for truck yards, docks and industrial traffic up to 176,000 lb axle loads.

Height
2.4 in
Segment length
20 in
Width (travel length)
13.8 in
Target speed
≤ 6 mph
Load rating
176,000 lb (88 US tons)
Material
Recycled rubber, steel-plate reinforced
Anchors
Bolt-down, asphalt or concrete
Reflectors
High-visibility yellow + reflective inserts
  • Truck yards & docks
  • Industrial plants
  • Distribution centers
Price this model
2.4-inch heavy-duty rubber speed bump with black and yellow segments, white directional arrows and bolt holes

Target speed ≤ 10 mph

Bolt-down

3-Inch Modular Rubber Speed Bump

Interlocking 39 in and 20 in modules with 10 in end caps — build any lane width, replace one section instead of the whole bump.

Height
3 in
Center module
39 in and 20 in
End caps
10 in each
Width (travel length)
15 in
Target speed
≤ 10 mph
Material
Recycled rubber, UV stable
Anchors
Bolt-down, asphalt or concrete
Reflectors
Yellow reflective bands
  • Parking lots
  • HOAs & apartments
  • Schools & campuses
Price this model

In real use

Installed where image matters

Specified for gated communities, corporate campuses and executive parking — the same bolt-down profile we ship nationwide.

Rubber speed bump with reflective chevrons installed across a paver driveway as a BMW X6 crosses it

Residential estate driveway

Premium finish, commercial hardware

Modular sections anchored across a 12 ft lane. Reflective chevrons stay visible at night, and the rubber absorbs the crossing instead of jarring the vehicle — the reason property managers spec it where luxury vehicles pass every day.

Profile
3 in
Lane
12 ft
Speed
≤ 10 mph
  • Yellow and black rubber speed bump across the entrance lane of a gated residential community

    Gated communities & HOAs

    Full-lane kits at entry gates and interior drives.

  • Rubber speed bump installed on asphalt at the parking entrance of a glass corporate office building

    Corporate campuses

    Executive parking approaches and drive aisles.

  • Close-up of a bolt-down rubber speed bump showing anchors, ribbed texture and reflective chevrons

    Bolt-down hardware

    Anchors, ribbed rubber and reflective chevrons up close.

Kit builder

Build your speed bump kit

Enter your lane width in feet. We calculate the modules and end caps you need and attach the result to your quote.

Your kit

2 × 10 in end caps + 3 × 39 in modules

5 pieces total for 1 lane(s).

Send this kit for pricing

Attached kit: 1 lane(s) × 12 ft — 2 × 10 in end caps + 3 × 39 in modules (5 pieces total)

No spam. Pricing, freight and lead time only.

Installation

Bolt-down in four steps

  1. 01

    Position

    Lay the modules across the lane and align the end caps to the curb.

  2. 02

    Mark

    Mark every bolt hole on the asphalt or concrete.

  3. 03

    Drill

    Drill the anchor holes to depth and clear the dust.

  4. 04

    Torque

    Drive the anchors and torque them flush with the rubber.

FAQ

Straight answers

How much do rubber speed bumps cost?
Price depends on profile, lane width, quantity and freight. Most parking-lot projects land between $260 and $520 per 12 ft lane installed-ready. Send your lane width and we return exact pricing within 24 hours.
What is the difference between a speed bump and a speed hump?
A speed bump is short (12–15 in of travel) and tall, targeting 5–10 mph on private property. A speed hump is 10–14 ft long and targets 15–20 mph on public roads.
How are they installed?
Bolt-down in four steps: position, mark the bolt holes, drill the asphalt or concrete, and torque the anchors. Two people install a 12 ft lane in under 30 minutes.
Do you ship nationwide?
Yes. We ship to all 48 contiguous states by LTL freight, with pallet and container pricing for volume orders.

More detail: speed bump vs speed hump and cost & installation.

Request pricing

Unit price, freight, lead time

One reply within 24 business hours. No call center, no drip campaign.

No spam. Pricing, freight and lead time only.

Faster? WhatsApp (602) 921-6133
Get a quote in 24h
WhatsApp us